Asymmetric Supercapacitor Device Research Articles

Revealing 1T-MoS2 with 76 % purity induced by various saccharides for supercapacitor performance

The preparation of metallic phase molybdenum disulfide (1T-MoS2) through an implementable method has become a top priority in research due to its excellent electrochemical performance. In this study, 1T-MoS2 using a facile one-pot hydrothermal method is successfully synthesized by incorporating saccharides. Moreover, a comprehensive understanding of the synthesis mechanism is induced by various saccharides. Glucose, a monosaccharide, not only possesses reducibility but also plays a crucial role in preparation of sulfur vacancies. Maltose is a disaccharide that can hydrolyze into glucose and fructose, both of which exhibit reducibility. On the contrary, dextrin is difficult to break down into fructose or glucose, and faces certain challenges in promoting the formation of 1T-MoS2. Importantly, 1T-MoS2 with 76 % purity obtained in our study exhibits exceptional electrochemical performance, demonstrating a high specific capacitance of 228.4 F g−1 at 2 A g−1 and maintaining a cycling stability of 97 % after 10,000 cycles. Furthermore, an asymmetric flexible supercapacitor device is assembled by 1T-MoS2 and active carbon on carbon cloths, which shows superior flexibility, high power density, and energy density. Notably, this work not only unveils the mechanism by which saccharides influence the synthesis of 1T-MoS2 but also provides support for the preparation of other metallic members in the transition metal dichalcogenides (TMDs) family.

Rational Design of Cobalt-infused Styrofoam Nickel Manganese Oxide: unlocking unprecedented capacitance for supercapacitor applications

Advancement in low to high-power device technology requires smart solutions for the energy-storing property of the devices. The Pseudo-capacitor with battery-type charge storing discharging mechanism can possess a high energy density. In this study, we present the synthesis of combustion-derived AxNi1-xMn2O4 (A= Co, Cu, Zn, & X= 0.01, 0.02, 0.03) nanoparticles for supercapacitor application. Among all the electrode materials studied, the Styrofoam structure of Co0.03Ni0.97Mn2O4 (3CoNMO) exhibited an utmost specific capacitance of 747.42 F/g at 50 mV/s, and galvanostatic charge/discharge (GCD) studies confirmed that the 3CoNMO has an outstanding specific capacitance of 746.76 F/g at 1 A/g. Moreover, the 3CoNMO exhibits remarkable cyclic stability retention (89.26%) after 10,000 continuous cycles at 10 A/g. Similarly, the asymmetric supercapacitor device was fabricated for the optimized working electrode, and the (3CoNMO||AC) delivers an outstanding specific capacitance of 31.85 F/g at a specific current density of 1A/g, it provides energy and power density of 11.25 WhKg-1 and 847.45WKg-1. The results highlighted that Co0.03Ni0.97Mn2O4 nanoparticle as an auspicious nominee for supercapacitor applications and exhibit good long-term stability.

Novel cobalt-incorporated two dimensional covalent organic frameworks for supercapacitor applications

Covalent-organic frameworks (COFs), are a promising new class of crystalline porous organic materials with confined structures either in 2D or 3D domains. The current study focuses on using a solvothermal approach consisting of sealed pyrex tubes to synthesize two-dimensional TBP-COF and TBP-COF that have been doped with cobalt (Co) (TBP-Co@COF). The results of the experimentally acquired X-ray diffraction study were compared with those from simulations, and it was discovered that both are in good agreement. A thorough theoretical analysis of the layer packing in AA stacking (P1) and AB stacking (P1) modes using the Materials Studio revealed that AA stacking is more stable than the AB stacking (P1) structure. The formation of imine linkage and incorporation of Co into the COF are indicated by the result of XPS. Unaggregated dispersion of Co particles can be seen on the square and rectangular sheets of TBP-COF in TEM and SEM images. Both materials are fabricated as electrode materials and evaluated for their supercapacitor applications. The TBP-Co@COF shows an enhanced specific capacitance (CSp) of 975F/g compared to the TBP-COF (827F/g) at 2 mV/s scan rate. TBP-Co@COF exhibit an energy density (ED) of 69 Wh/kg even at a high power density (PD) of 75000 W/kg and also retains 79 % of its initial capacitance up to 2000 cycles. TBP-COF and TBP-Co@COF were fabricated for an asymmetric supercapacitor device (ASD) and found to exhibit a CSp of 191F/g at a scan rate of 2 mV/s.

The construction of a flexible solid-state asymmetric supercapacitor device using nickel-copper oxide nanoplates and carbon nanosphere serving as positive and negative electrode, respectively with excellent electrochemical capabilities

Here, nickel-copper oxide nanoplates (NCN) and carbon nanosphere (CNS) as positive and negative electrodes are synthesised via a hydrothermal protocol without adding any surfactant and binders. The NCN and CNS electrodes in KOH electrolyte exhibit superior specific capacitance of ∼ 2362.5 F g−1 and ∼ 246.11 F g−1 at 1 A g−1 respectively. The NCN and CNS retained 98.54 % and 97.88 % of the initial capacitance after 3000 galvanostatic charge–discharge (GCD) cycles, respectively. Additionally, an asymmetric supercapacitor (ASC) device NCN//CNS is constructed using NCN and CNS as positive and negative electrodes, utilizing poly(vinyl alcohol) PVA − KOH gel electrolyte separator. The ASC device demonstrates a maximum energy density of 50.4 Wh kg−1 (181.44 KJ kg−1) with a power density ∼ 750 W kg−1 at 1 A g−1, maintaining 90.4 % cyclic stability after 10,000 GCD cycles. The electrochemical outputs of the device present significant potential for the advancement of high-performance ASC devices in electronic applications.

Facile synthesis of flower-like NiCo/NiO–CoO surrounded by N-doped porous carbon derived from covalent organic framework for aqueous asymmetric supercapacitor

The persisting quest for improving charge density, electronic conductivity and cyclic stability of the electrode material in supercapacitor (SC) applications still demands intensive research and advancements. This study also aims the aforementioned pursuit with the construction of hybrid supercapacitor using mixed metal oxides with the incorporation of metal and supported with porous carbon to improve the charge density, electrical conductivity and cyclic stability, respectively. A covalent organic framework (COF) was synthesized and doped with nickel (Ni2+) and cobalt (Co2+) ions followed by carbonization at 1000 °C for 3 h to generate NiCo/NiO–CoO surrounded N-doped porous carbon (NPC) framework. The X-ray diffraction reveals that nickel considerably impacts the crystallinity of NiCo/NiO–CoO and the Raman spectroscopy revealed that the NiCo/NiO-CoO-NPC with an equal molar ratio of Ni2+ and Co2+ ions (NiCo/NiO-CoO-NPC-2) offered the highest degree of graphitization. The electron microscopic images showed the formation of flower-like morphology of NiCo/NiO-CoO-NPC-2 with a size of 250 nm and the greater number of flowers on NPC's surface could augment the electrochemical activity of the composite material. The NiCo/NiO–CoO-NPC-2 offered an attractive specific capacitance (Cs) of 845 F g−1 @ 1 A g−1 and preserves 93% capacity retention @ 10 A g−1 after 6000 charge-discharge cycles while exploited in SC application. The metal-free COF carbonized at 900 °C (CCOF-900) is utilized as the negative electrode with a Cs of 286 F g−1 @ 1 A g−1 for the construction of an asymmetric supercapacitor device and the NiCo/NiO-CoO-NPC-2//CCOF-900 device delivered efficient energy of 54 Wh kg−1 at a power density of 633 W kg−1.

Synergistic effects of Ag nanoparticles in the rGO and Co3O4 based electrode materials for asymmetric supercapacitors

A systematic investigation of the composite electrode materials is vital in fabricating supercapacitors with high specific capacitance and good stability. The present work systematically studies the synergistic effects of Ag nanoparticles (AgNPs) on the electrochemical behaviour of rGO-based supercapacitor anode and Co3O4/rGO composite cathode. The Co3O4/(Ag/rGO) composite has been fabricated by hydrothermally growing Co3O4 nanoparticles over the previously prepared Ag/rGO support in the 70:30 ratio. The electrochemical performance of fabricated electrodes was evaluated by cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) in 1 M KOH electrolyte. The Ag/rGO electrode having 15 - 20 % of AgNPs displays a specific capacitance of 553.6 F/g by CV (@10 mV/s) and 449.4 F/g by GCD (@0.35 A/g), which is 2.9 – 3.1 times higher than pristine rGO, when scanned in the range of – 1.0 V - 0.0 V (Vs. Ag/AgCl). The Co3O4/(Ag-20/rGO) composite electrode (in the ratio 70:30) possesses 244.9 F/g of specific capacitance (by GCD @3.8 A/g in the range of – 0.2 V - 0.5 V (Vs. Ag/AgCl)), which is 3.2 and 2.0 times higher than Co3O4 and Co3O4/rGO respectively. The Co3O4, Co3O4/rGO and Co3O4/(Ag/rGO) samples retained 67 % (at 3.8 A/g), 91 % (@1.4 A/g), and 82 % (@1.4 A/g) of specific capacitance after 2000 cycles. The asymmetric supercapacitor device in rGO||Co3O4/Ag/rGO configuration shows an initial specific capacitance of 438.0 F/g, energy and power densities of 38.9 Whkg‒1 and 640 Wkg‒1, respectively, at 2 A/g current density. The demonstrated boost in performance arises due to the presence of Ag nanoparticles leading to enhanced conductivity, catalyzing the pseudocapacitive reactions and preventing the graphene layers from aggregation by acting as spacers, spacers, thus making Ag/rGO and Co3O4/Ag/rGO as potential electrode materials for asymmetric supercapacitors.

In Situ Fabrication of Hierarchical CuO@CoNi-LDH Composite Structures for High-Performance Supercapacitors.

Layered double hydroxide (LDH) materials, despite their high theoretical capacity, exhibit significant performance degradation with increasing load due to their low conductivity. Simultaneously achieving both high capacity and high rate performance is challenging. Herein, we fabricated vertically aligned CuO nanowires in situ on the copper foam (CF) substrate by alkali-etching combined with the annealing process. Using this as a skeleton, electrochemical deposition technology was used to grow the amorphous α-phase CoNi-LDH nanosheets on its surface. Thanks to the high specific surface area of the CuO skeleton, ultrahigh loading (̃16.36 mg cm-2) was obtained in the fabricated CF/CuO@CoNi-LDH electrode with the cactus-like hierarchical structure, which enhanced the charge transfer and ion diffusion dynamics. The CF/CuO@CoNi-LDH electrode achieved a good combination of high areal capacitance (33.5 F cm-2) and high rate performance (61% capacitance retention as the current density increases 50 times). The assembled asymmetric supercapacitor device demonstrated a maximum potential window of 0-1.6 V and an energy density of 1.7 mWh cm-2 at a power density of 4 mW cm-2. This work provides a feasible strategy for the design and fabrication of high-mass-loading LDH composites for electrochemical energy storage applications.

Solution-processed Sb2O3: A promising electrode material for high-performance supercapacitors and electrocatalysts

Easy accessibility, wide range of redox states, affordable cost, and simple synthesis methods of metal oxides have gained a significant interest in the domains of electrochemical supercapacitors and electrocatalysts. The successive ionic layer adsorption and reaction (SILAR) chemical synthesis approach has been introduced to preparing nanocrystalline antimony oxide (Sb2O3) for both energy storage and water splitting applications. The Sb2O3 electrode demonstrates a remarkable specific capacitance of 3011 F/g at a current density of 2 A/g in a 1 M solution of potassium hydroxide (KOH). The current design of the Sb2O3//Bi2O3 (bismuth oxide) asymmetric electrochemical supercapacitor device has endowed a specific capacitance of 391 F/g, a maximum energy density of 78.2 Wh/Kg at a power density of 1000 W/Kg, and an outstanding capacitance retention of 77 % even after 5000 redox cycles. The Sb2O3 electrode demonstrates outstanding performance in the oxygen evolution process at a current density of 10 mA cm2, with an overpotential of 206 mV. The Sb2O3 as an electrocatalyst also exhibits exceptional results in the hydrogen evolution reaction with an overpotential of 124 mV/dec. Both of these electrochemical processes are distinguished by the evolution of oxygen which is capable of facilitating the process of water splitting to obtain clean energy for day by day growing population.

NiFe2O4@NiCo2O4 hollow algae-like microspheres enabled by Mott-Schottky for electrochemical energy storage

Designing hybrid structure of transition metal oxides (TMOs) with controlled morphology can adjust the electronic structure and create more kinetics reactions. Herein, a new kind of NiFe2O4@NiCo2O4 nanocomposite was synthesized with one pot hydrothermal route. The unique hollow algae-like microspheres with plenty nanowires and the synergistic effect factors promote high electroactive sites and generate a built-in electric field. The constituted Mott-Schottky heterostructure creates strong interfacial interaction, paves the way for the electrolyte ions diffusion and results high charges transfer abilities by reducing the energy barriers in the heterointerfaces. As cathode material, the NiFe2O4@NiCo2O4 presents satisfactory specific capacity of 996C·g−1 at 0.5 A·g−1 and maintains ultrahigh capacity retention of 81 % at 30 A·g−1 with marvellous stability of only 6 % loss during 20,000 cycles. Interestingly, asymmetric hybrid supercapacitor device based NiFe2O4@NiCo2O4//active carbon (AC) provides tremendous energy density of 117.6 Wh·kg−1 at 438 W·kg−1 power density. What’s more, all-solid-state device offers ultra-low self-discharge process of 9.5 % through 24 h. Therefore, the combination of NiFe2O4@NiCo2O4 to form Mott-Schottky heterojunction was a promising strategy to develop electrode material with high energy storage performance.

Design of high-performance transition metal sulfide electrode materials and its application in supercapacitors

In this paper, the starting point is to create a large surface area, multi-metal cooperative composite material, and then add lithium to enhance the capacitance of the material to build a high-performance and high-stability electrode material. The CoMnLi hydroxide is synthesized on the metal organic framework Ni-BTC, and the composite is vulcanized as Ni-BTC@CoMnLiS using a solvent-thermal process. Moreover, the electrochemical properties electrode materials prepared under different conditions are investigated. It is eventually discovered that the electrode material prepared using water as a solvent having the best electrochemical performance at a reaction time of 6 h, and it is named Ni-BTC@Co2.13Mn1.78LiS4.52#6 (N@CMLS#6). The N@CMLS#6 electrode material has a high specific capacity (1040C g−1, 1 A g−1) and an eminent cycling stability (87.94 %, 10,000 cycles). In addition, the asymmetric supercapacitors devices (N@CMLS#6//AC) exhibit large energy density (82.14 W h kg−1, 800 W kg−1) and good cycle life (85.62 % of the original capacity after 10,000 charge-discharge cycles). Connecting two asymmetric supercapacitors (ASC) devices in series may light up tiny Light Emitting Diode (LED) lights, demonstrating its practical utility.

Cross-linked NiCo2O4 and MnFe2O4 nanosheets wrapped Lentinula edodes-derived carbon as an efficient electrode material

Efficient and environmentally friendly energy storage systems are urgently required because of severe environmental problems and high energy demands. Compared to traditional devices used to store energy, supercapacitors have received extensive attention from researchers referring to their excellent performance. Because of their unique characteristics, carbon generated from biomass and transition metal oxides are commonly employed in supercapacitors and used to prepare effective electrode materials. However, their electrochemical behavior has several limitations. In this study, two types of nanosheets, NiCo2O4 and MnFe2O4 were sprouted on the surface of Lentinula edodes-derived carbon by a simple strategy availing two-step hydrothermal to prepare the composite electrode material with two kinds of nanosheets intercalating and crosslinking on a carbon core (LDC@NiCo2O4/MnFe2O4). In this process, the carbon core, as a stamen, was uniformly covered with nanoflake petals. Under the conditions of 1 A g−1, LDC@NiCo2O4/MnFe2O4 represented a specific capacitance of 1017 F g−1, proving that LDC@NiCo2O4/MnFe2O4 has a huge prospect application in supercapacitors. Futhermore, we manufactured an asymmetric supercapacitor (ASC) including LDC@NiCo2O4/MnFe2O4 as the positive electrode and activated carbon which was used as a negative electrode. At a power density of 725 W kg−1, the device we fabricated reached an energy density of 24.49 Wh kg−1. Thus, the capacitance retention rate of the ASC device was still 82.3% compared to the initial capacitance of the device after 10,000 cycles. This study provides a comprehensive reference aimed at improving the utilization efficiency of transition metal compound materials in electrochemical energy storage devices.

Hierarchical flower bud-like P, W co-doped NiCo2S4@MoS2 composites as high-performance electrodes for asymmetric supercapacitor

Engineering binary transitional metal sulfides (BTMSs)-based electrode materials with a rationally designed constituent architecture is a viable strategy for improving their rate capability and electrochemical durability, which provides a possibility for their application in supercapacitors (SCs). Herein, a novel three-dimensional (3D) flower bud-like phosphorus and tungsten co-doped NiCo2S4 and MoS2 composites (P, W-NCS@MS) is prepared on conductive carbon cloth using the hydrothermal method. The effects of P, W-doping, or MoS2-combination on the morphology, structure and electrochemical properties of NiCo2S4-based electrode materials are systematically studied. The designed P, W-NCS@MS achieves a high specific capacity of 1250C g−1 at 1 A g−1 and a satisfactory capacity retention of 80 % after 10,000 cycles. In addition, the asymmetric supercapacitor (ASC) constructed through P, W-NCS@MS and activated carbon electrodes delivers a high energy density of 65.0 Wh kg−1 at the power density of 400 W kg−1 and shows satisfactory cycling stability of 85 % capacitance retention after 20,000 cycles. Notably, the assembled ASC device successfully powered electronic devices in a serial circuit, highlighting its prospective applications in energy storage. This work offers a viable design approach for heteroatom doping and hierarchical interface structures in composite electrode materials toward high-performance SCs.

Smart Textile Flexible MnCo2O4 Electrodes: Urea Surface Modification for Improved Electrochemical Functionality.

Surface microstructure modification of metal oxides also improves the electrochemical performance of metal oxide nanoparticles. The present investigation demonstrates how varying the urea molar content during the hydrothermal process altered the surfaces of MnCo2O4 nanoparticles. Successive increases of 0.1 M in urea concentration transformed the surface shape of MnCo2O4 nanoparticles from flower-like to sheet-like microstructures. Excellent electrochemical performance of MnCo2O4 nanoparticles was demonstrated in an aqueous 1 M KOH electrolyte. The improved MnCo2O4 nanoparticles have been employed to develop an asymmetric supercapacitor (ASC). The ASC device exhibits an energy density of 13 Wh/kg at a power density of 553 W/kg and a specific capacitance of 29 F g-1 at a current density of 4 mA/cm2. The MnCo2O4 nanoparticle electrode demonstrates remarkable electrocatalytic activity in both HER and OER. The MnCo2O4 electrode shows overpotential for HER and OER at 356 mV and 1.46 V, respectively. The Tafel slopes for HER and OER of the MnCo2O4 electrode are 356 mV/dec and 187 mV/dec, respectively.

Enhanced electrochemical performance of the electrodeposited nickel sulfide on ZIF-67@RGO composite for supercapacitor applications

Zeolitic imidazolate frameworks (ZIF), as a form of metal-organic frameworks (MOFs), are promising materials used as electrodes for energy storage devices. Their high electrical conductivity results from numerous conjugated systems and the collaboration between the ligand and cobalt significantly enhances their redox capacity. The bulk electrical conductivity and specific capacitance of ZIF materials can be enhanced by the incorporation of rGO and metal sulfide, respectively. Herein, ZIF-67@RGO nanocomposite was fabricated and then modified with 20.0 wt% Ni nanoparticles followed by co-electrodeposition of sulfur as a novel electrocatalyst. The prepared composites were analyzed using various techniques, including FT-IR, XRD, XPS, SEM, and EDX mapping. The electrochemical performance of the prepared composite electrodes was measured using different techniques such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge-discharge (GCD). The S-Ni/ZIF-67@RGO electrode displayed excellent electrochemical behaviour which is evident in the high value of the specific capacitance of 1142.3 F g−1 at a current density of 1 A g−1. On the other hand, an asymmetric supercapacitor (ASC) was assembled by employing the unique composite material in conjunction with conductive carbon black. The power and energy densities of the ASC device were 774 W kg−1 and 88.2 Wh kg−1, respectively. The capacitance of S-Ni/ZIF-67-RGO is retained at 90.8% even after 3000 cycles, suggesting remarkable cycle stability. This study expands the application scope of ZIF-67 and introduces a new method for fabricating novel electrode materials.

Ammonium Ion-Pre-Intercalated MnO2 on Carbon Cloth for High-Energy Density Asymmetric Supercapacitors.

With the continuous development of green energy, society is increasingly demanding advanced energy storage devices. Manganese-based asymmetric supercapacitors (ASCs) can deliver high energy density while possessing high power density. However, the structural instability hampers the wider application of manganese dioxide in ASCs. A novel MnO2-based electrode material was designed in this study. We synthesized a MnO2/carbon cloth electrode, CC@NMO, with NH4+ ion pre-intercalation through a one-step hydrothermal method. The pre-intercalation of NH4+ stabilizes the MnO2 interlayer structure, expanding the electrode stable working potential window to 0-1.1 V and achieving a remarkable mass specific capacitance of 181.4 F g-1. Furthermore, the ASC device fabricated using the CC@NMO electrode and activated carbon electrode exhibits excellent electrochemical properties. The CC@NMO//AC achieves a high energy density of 63.49 Wh kg-1 and a power density of 949.8 W kg-1. Even after cycling 10,000 times at 10 A g-1, the device retains 81.2% of its capacitance. This work sheds new light on manganese dioxide-based asymmetric supercapacitors and represents a significant contribution for future research on them.

High-performance asymmetric supercapacitors assembled with novel disc-like MnCo2O4 microstructures as advanced cathode material

Herein, porous MnCo2O4 with disc-like (MnCo2O4-discs) and ring-like (MnCo2O4-rings) microstructures were respectively synthesized using an initial hydrothermal method at different temperatures and a calcination treatment in air. The electrochemical properties of these MnCo2O4 materials were investigated in three-electrode and two-electrode systems, and as such, MnCo2O4 presented a battery-like electrochemical response. The specific capacity of MnCo2O4-discs was determined to be 296.1C/g at 1 A/g, superior to 246.3C/g for MnCo2O4-rings. An asymmetric supercapacitor (ASC) was assembled with MnCo2O4 as the cathode and activated carbon (AC) as the anode to evaluate the potential for practical application. The MnCo2O4-discs//AC ASC exhibited an energy density (Ed) of 35.8 W h kg−1 at a power density (Pd) of 927.5 W kg−1. For the MnCo2O4-rings//AC ASC, an inferior Ed of 31.4 W h kg−1 under 890.9 W kg−1 was achieved. Furthermore, the two ASCs presented outstanding cyclic performance after 5000 cycles at 6 A/g. The exceptional properties of MnCo2O4 microstructures can be applied to the assembly of ASC devices, which can have promising potential for application in electrochemical energy storage. This synthetic method is straightforward, cost-effective, and can be extended to fabricate similar electrode materials with superior electrochemical performance.

Alternative inner filling and outer surface coating of BNNT by Tungsten(VI) oxide for supercapacitor electrode

The motivation behind this research is to address the need for advanced energy storage materials by exploring the selective filling and coating of boron nitride nanotube (BNNT) with tungsten(VI) oxide (WO3) to enhance the pseudocapacitive performance. In this study, we present a novel synthesis method that allows precise control over the extent of filling and coating, aiming to create tailored hybrid structures. Morphological and structural analysis confirm the filling and coating of BNNT by WO3. Inner filling and outer surface coating of BNNT by WO3 significantly impact on the electrochemical properties. The filling of WO3 within the BNNT can enhance the stability of the system, whereas outer surface coating of BNNT by WO3 improves the capacitive performances. The role of BNNT influences both these phenomena by acting as electrolyte transportation channel as well as stabilizing the WO3. In three electrode study, WO3 coated BNNT showed the maximum specific capacitance of 856 F/g at 1 A/g. An asymmetric supercapacitor device using WO3 coated BNNT as positive electrode revealed the maximum specific capacitance of 137 F/g at 2 A/g current density with an improved energy density of 52 W h/kg. The WO3 coated BNNT-based asymmetric supercapacitor device also showed ∼81 % specific capacitance retention after the completion of 10,000 GCD cycles, whereas WO3 filled BNNT-based supercapacitor device demonstrated better stability (∼94 % specific capacitance retention) due to the filling and stabilization of pseudocapacitive WO3 by BNNT.

Binder free cobalt Manganese layered double hydroxide anode conjugated with bioderived rGO cathode for sustainable, high-performance asymmetric supercapacitors

Metal-organic frameworks (MOFs) possessmultifunctional characteristicssuch as tuneable pore structure and high specific surface area and are being designed with great interest to enhance the electrochemical properties of current energy storage devices. In this aspect, MOFs-derived layered double hydroxides (LDHs) are important candidates for advanced supercapacitors due to their high electrochemical activity and electric conductivity. Herein, we report synthesis of Cobalt Manganese layered double hydroxides (CoMn LDH) utilising Co MOF as a precursor via ion exchange method, while optimising the dosage of Mn to achieve the best possible structural outcome. The unique structure of CoMn LDH expressed high electrochemical parameters possessing specific capacitance of 1305F/g at 1 A/g. Afterwards, an asymmetric supercapacitor device was fabricated employing CoMn LDH as cathode and coffee grounds derived rGO (reduced graphene oxide) as anode. The as-prepared asymmetric supercapacitor device demonstrated a maximum working potential window of 1.2 V with energy and power density of 23.8 Wh/kg and 0.30 kW/Kg respectively. The device also exhibits superiorcoulombic efficiency and capacitance retention of 71.11 % and 82.7 % respectively over 3010 charge–discharge cycles that represents an effectiveapproach towards sustainable and effectiveenergy storage devices. In a nutshell, our study centred on adjusting composition, engineering structures, and assembling devices.

Designing and simulating of NiO@Graphite asymmetric supercapacitor device using thermally optimized nickel oxide electrode

Designing and simulating of NiO@Graphite asymmetric supercapacitor device using thermally optimized nickel oxide electrode

Effect of fluoride (CoF2) based electrode material for high energy and power density asymmetric flexible supercapacitors

Herein, an asymmetric supercapacitor (ASC) device was assembled by employing the pristine CoF2 as active positive electrode material and activated carbon (AC) as negative electrode material. The CoF2 electrode exhibited an outstanding electrochemical behavior with enhanced specific capacitance (Cs) of 872 F/g at 1 A/g current density in three electrode configurations. The reversible Faradaic redox reactions in CoF2 instigate the formation of cobalt-oxyfluorides and generating the mixed valence state of Co (Co2+ and Co3+) which improves its electrical conductivity and electrochemical behaviors. Furthermore, the room temperature paramagnetic nature of CoF2 increases the gradient force of ions which could possibly increase the redox reactions at the electrolyte/electrode interface. The constructed asymmetric device structure of CoF2//AC revealed a quasi-rectangular shaped cyclic voltametric curve and symmetrical semi-triangular shaped galvanostatic charge-discharge profiles, respectively, which affirms the combined electric double layer capacitance and pseudocapacitive nature by its hybrid assembly. Hence, the constructed CoF2//AC ASC demonstrated a remarkable specific capacitance of 141 F/g, energy density of 44.06 Wh.Kg−1, and power density of 422.97 W.Kg−1 at 1 A/g with the high cell voltage of 1.5 V. The CoF2//AC ASC device retained c.a. 92 % of its initial capacitance and attained over 96 % of Coulombic efficiency after 2000 cycles of charge-discharge profiles at 1 A/g, which suggests the high electrochemical stability. This admirable electrochemical performance and the origin towards the magneto-capacitance of CoF2 could pave a new way to explore next generation high-performance supercapacitors.